My dog's bowl was looking pretty rough so it seemed time I build her a new one. I wanted something that could handle water and generally take a beating. Resin seemed like the perfect option. I had been wanting to make a resin panel filled with scrap wood for a while so I started with that and then put the panel through the X-Carve CNC Router to form the bowl holder. I welded a base for it and then put it all together. This was a great project because it incorporated a little bit of woodworking, resin, the CNC Router, and welding. The dog loves it and it has held up to rough use very well. Materials Used: Plywood Tyvek Tape Total Boat 2:1 Epoxy Medium Hardener 1/4" Steel Rod Flux Core Wire Paint Thinner Wipe On Polyurethane, Satin Tools Used: Dewalt 20v Jigsaw Dewalt 20v Power Drill Pry Bar Mallet Dewalt 20v Hand Power Planer Supermax 19-38 Drum Sander Inventables X-Carve CNC Router Dewalt Random Orbital Sander Lincoln Electric MP210 Welder Chop Saw Angle Grinder Square Screwdriver Finishing Cones
0 Comments
Leave a Reply. |
Michael DenaultFather, Maker, and all around fun guy. Archives
September 2020
Categories |
Copyright 2019
Makers Workshop LLC |
55 Main Street
Maynard, MA 01754 |